LK-7156 is yellow transparent medium temperature hot melt adhesive. Yellow transparent medium temperature hot melt adhesive is a type of adhesive that is designed to be applied in a molten state and then solidify as it cools, forming a strong bond between two surfaces.
The yellow hot melt adhesive granules are formulated with EVA (Ethylene Vinyl Acetate) as the primary component, and they are entirely fillerless. This means that you're getting pure adhesive material without any diluting fillers, ensuring optimum bonding strength and performance.
These adhesive granules are unique in their appearance, presenting themselves as beige transparent particles. This characteristic allows for a visually appealing adhesive application, particularly when transparency or aesthetics are a concern.
Raywin Coating places great emphasis on environmental responsibility. These adhesive granules are non-toxic, making them safe to handle and use. Moreover, their environmentally friendly nature aligns with sustainability goals, making them a smart choice for eco-conscious applications.
Yellow hot melt adhesive granules exhibit exceptional heat resistance. They maintain their adhesive properties even at elevated temperatures, ensuring a reliable and durable bond, even under demanding conditions.
Not only do these adhesive granules excel in high-temperature environments, but they also exhibit excellent low-temperature resistance. This characteristic makes them versatile and suitable for applications that may encounter temperature variations.
After applying these granules as an adhesive, they display impressive resilience. They can withstand subsequent painting processes, allowing for further customization and finishing of the bonded materials. This feature is invaluable in industries where aesthetics and surface finishing are critical.
If you want to know more information about yellow hot melt adhesive granules, please contact us. We will provide professional answers.
Viscosity: under180°C 60000-70000 mpa. s at C (Brinell)
Density: 1.3g/cm3
Softening point ：800°C ( ball method)
Resistance to hot spots>650C (ASTMD-3461-76)
Material temperature>15°C
Ambient temperature>15°C
Material moisture content: 8%~10%
The temperature of the glue tank is 150~180°C
The rubber roller temperature is 140~170°C
Pressure 3-5 KG/KM3
Feed speed>15-40 m/min
1,It is suitable for small and medium-sized coating machines;
2, Suitable for bonding between particle board, solid wood, MDF and decorative surface materials (wood veneer);
3, Suitable for feeding speed of 15-40 meters/minute;
4,Mostly used for wrapping or fitting wood lines;
5, It can also be used for edge banding;
• If the machine is shut down for more than 2 hours, the temperature of the glue box should be lowered to avoid aging of the hot melt adhesive and affecting the bonding effect; If the machine is shut down for more than 8 hours, apply or empty the glue in the glue box
• The process parameters listed in the manual are only obtained based on experience and test data, and are for reference only. The actual process parameters should be determined based on production conditions. Due to the inability to fully control the actual production conditions of the glue users, our company cannot bear any risks and responsibilities arising from the improper use of our glue.
