UV materials applications for wood veneer and leather
Wood veneer is divided into natural wood veneer and technology veneer. Whether it is natural wood veneer and technology veneer, in the furniture processing need to be veneered process.
In the production of wooden furniture, in order to beautify the appearance of products, improve the use of performance, protect the surface, improve the strength of medium and high-end furniture or wood products are to carry out surface finishing or veneer (veneer) processing.
However, in the furniture factory for veneer process, the veneer must be applied to a certain temperature, causing the melting of hot melt adhesive, so that the veneer and density boards and other bonding effect, and in this process, due to high temperature and intense deformation of the veneer, will lead to some of the veneer cracking, peeling and other undesirable consequences of the products reworked or scrapped, increasing the cost of production. The use of UV varnish in the veneer surface roller coating protection and beautification layer, can greatly avoid the adverse consequences of the veneer process.
The current veneer thickness is usually 0.30 ~ 0.45mm, due to the thickness of the veneer is very thin, so the traditional are wrapped in furniture veneer and then painted, time-consuming and labour-intensive.
Based on the technical problems existing in the background technology, the new veneer on the UV painting process came into being, by optimising the conditions of the process to get very thin, good flexibility and good non-cracking, mirror effect remarkable appearance of high-quality veneer.
According to different customer requirements to provide different construction process,
The basic appliciation process : UV adhesion primer: the amount of 10-15g per square metre, used to improve adhesion with the bottom air ------ elastic putty: after the application of UV adhesion primer directly coated with elastic putty, the veneer surface of the concave holes and other filler, the dosage of 35-40g per square metre -----UVclear elastic primer 2 times , the dosage of 50g per square metre ------uv clear sanding primer, the dosage of 25g/sqm - uv clear top coat 15g/sqm.
Recently we get some inquiry about of this product, We have made the uv dry samples for clients, they give good feedback, Extraordinarily flexible, no cracking.
If you want to test our uv product, Pls contact with us,website is www.raywincoating.com
