EVA hot melt adhesive is a versatile and widely used bonding solution known for its ease of application, quick setting time, and strong bond strength.
Automatic contour bonding and manual edge bonding for PVC, PET, veneer, and solid wood strips, suitable for particle board.
EVA hot melt adhesive is known for its ability to perform effectively over a wide temperature range. This characteristic allows it to maintain its adhesive properties in both high and low-temperature environments, ensuring its suitability for diverse applications.
EVA hot melt is specially designed to be compatible with both automatic contour edge bonding machines and manual edge bonding machines. Its adaptability to different types of equipment makes it a versatile choice for manufacturers and businesses looking to streamline their edge bonding processes.
Hot melt glue offers high cost performance, making it an economical choice for businesses. This means that you get reliable adhesive performance without breaking the bank, contributing to cost-effective production processes.
One of the remarkable features of this EVA hot melt is its compatibility with UV paint. This compatibility opens up possibilities for applications that require UV-cured finishes or coatings, expanding its utility in industries that demand UV paint applications.
Raywin ensures that all the raw materials used in the production of EVA hot melt adhesive comply with regulatory standards. Specifically, they adhere to FFA regulations 21CFR175 105, which pertain to adhesives. This commitment to regulatory compliance ensures that the adhesive meets safety and quality standards.
For more information about EVA hot melt, please contact us. Raywin will provide professional answers.
Appearance: Light yellow transparent small particles
Viscosity 5000-1000 cps (180 ℃)
Toxicity None
Density 1.05g/cm3
Globe softening point 78-88 ℃
Standard packaging 25 kg/bag
Store in a dry, cool place below 40 º C for a period of 24 months. When the ambient temperature reaches 60~70 º C, the colloid will soften.
1. Moisture content of base material: 8-12%,
2. Precautions for substrate:
It is recommended to try it out first. The surface of the material should be free of dust, grease, and subjected to constant temperature and humidity treatment
3. Glue application amount:120-200 g/m2
Too high or too low will have an impact on the curing and strength of the adhesive.Too high, slow drying speed, or too low can cause glue shortage
The temperature of the glue tank is 155-175 ℃ for edge sealing and 150-190 ℃ for cladding (final use temperature is determined through commissioning)
4. Temperature of gluing stick:
150-170 ℃ for edge sealing,
145-185 ℃ for winter
5. Feed speed :8-20 m/min
6. The optimal operating environment between 15 and 30 ℃
7. the humidity should be maintained at around 55-75%
8. After pressure relief, store for 24-72 hours
• If the machine is shut down for more than 2 hours, the temperature of the glue box should be lowered to avoid aging of the hot melt adhesive and affecting the bonding effect; If the machine is shut down for more than 8 hours, apply or empty the glue in the glue box
• The process parameters listed in the manual are only obtained based on experience and test data, and are for reference only. The actual process parameters should be determined based on production conditions. Due to the inability to fully control the actual production conditions of the glue users, our company cannot bear any risks and responsibilities arising from the improper use of our glue.